Keratin for hair – smooth and healthy hair

Keratin instructions - SUPREME

HOW THE PROCEDURE IS PERFORMED

1. Wash hair 3 times with Supreme clarifying shampoo.

On the last wash, if necessary, leave the shampoo to act for 5–10 minutes to maximally open the cuticle.

2. Rinse out the shampoo 100% and dry the hair 100%.

3. Apply Supreme Keratin mask in fine strands, stepping back 1–1.5 cm from the scalp. Avoid contact with the scalp also during combing.

4. Waiting time:

• for thick and coarse hair – up to 20 minutes

• for fine, sensitive or colored hair – 10–15 minutes

5. After the exposure time, remove excess product with a towel

(if necessary, a minimal amount can be rinsed off).

6. Blow-dry hair using cold air or minimal heat so that the keratin is not fixed with incorrect heat. Hair must be 100% dry.

7. Straighten the hair in thin strands according to the standard.

STRAIGHTENING STANDARD

SUPREME KERATIN

Straighten each strand according to the hair structure and condition.

Number of strand passes

• bleached or very fine hair – 6–8 times

• natural or colored, medium-structured hair – 10–15 times

• thick, curly or resistant hair – 15–20 times

Temperature recommendations

• for fine, light, gray or colored hair – 180–210 °C

• for thick or resistant hair – up to 230 °C

For best results, it is recommended to use a titanium straightener.

MANDATORY AFTER STRAIGHTENING

THIS FORMULA MUST BE RINSED OUT IN THE SALON AFTER STRAIGHTENING.

• After straightening, allow the hair to cool for about 5–10 minutes
• Rinse hair thoroughly with water only (do not use shampoo)
• Apply a hair mask (for extra hydration, SOS reconstruction can be used)
• For extra shine, Phyto Power spray can be used.

Keratin instructions - SELANTE

HOW THE PROCEDURE IS PERFORMED.

1.Before use, shake the bottle thoroughly.

2. Prior washing with clarifying shampoo is not necessary. If the hair has styling products, wash with regular shampoo.

3. Rinse out the shampoo completely, dry hair 100%.

4. Apply the product to dry hair with a brush, evenly from roots to ends, avoiding application to the scalp.

5. Waiting time

• for blonde, colored, gray or bleached hair – 30–40 minutes

• for thick or resistant hair – 40–50 minutes

6. Rinse the product out completely with water only.

7. Blow-dry hair 100% with a hairdryer, light brushing is possible.

8. Straighten the hair in thin strands according to the standard.

STRAIGHTENING STANDARD

SELANTE PASSO ÚNICO

Straighten each strand according to the hair structure and condition.

Number of strand passes

• bleached, very fine or damaged hair – 6–8 times

• natural or colored, medium-structured hair – 8–12 times

• thick, curly or resistant hair – 12–15 times

Temperature recommendations

• for fine, light, gray or colored hair – 180–210 °C

• for thick or resistant hair – up to 230 °C

For best results, it is recommended to use a titanium straightener.

WASHING AFTER THE PROCEDURE

After the straightening procedure, washing the hair is not mandatory.

If hair is washed within the first 24 hours after the procedure, the following conditions must be observed:

• do not use shampoo

• rinse hair only with lukewarm water

• it is allowed to use conditioner or mask

• avoid hot water and intense mechanical action (strong rubbing, massages, combing)

Finishing care

At the end of the procedure, it is recommended to apply Phyto Power heat protection, as well as Velvet Drops, to:

• additionally protect hair from heat exposure

• give shine and smoothness

• reduce moisture loss and frizz.

Botox Instructions - PRO REPAIR

HOW THE PROCEDURE IS PERFORMED

HOT BOTOX

1. Pre-washing with a cleansing shampoo is not necessary.

If hair has oils, masks, or styling products, wash with daily shampoo, then rinse the shampoo out 100% and dry the hair 100%.

2. Apply the product to dry hair using a brush and comb, avoiding the scalp.

3. Waiting time:

• for blonde, colored, gray, or bleached hair – up to 50 minutes

• for thick or resistant hair – up to 1 hour 30 minutes

4. Rinse the product out completely with water only.

5. Blow-dry hair until it is 100% dry.

6. Straighten in thin sections according to the standard.

STRAIGHTENING STANDARD

PRO REPAIR BTX ULTRA

Straighten each section according to the hair structure and condition.

Number of passes per section

• very fine or damaged hair – 6–10 times

• bleached or colored, medium-structured hair – 10–12 times

• thick or resistant hair – 12–15 times

Temperature recommendations

• for fine, light, gray, or colored hair – 180–210 °C

• for thick or resistant hair – up to 230 °C

For best results, it is recommended to use a titanium straightener.

COLD BOTOX (WITHOUT STRAIGHTENING)

Pro Repair BTX Ultra can also be used as a cold botox if intensive hair restoration is needed without thermal fixation.

• Apply Pro Repair BTX Ultra Mask in fine sections

• Massage thoroughly along the entire hair length

• Leave for 50 minutes to 1 hour 30 minutes

• Rinse thoroughly with water

• Finish the procedure with the desired care or styling product

WASHING AFTER THE PROCEDURE

After the procedure, washing the hair is not mandatory.

If hair is washed within the first 24 hours after straightening, observe the following:

• do not use shampoo

• rinse hair only with water

• conditioner or mask is allowed

• avoid hot water and intensive mechanical impact

This helps maintain the results of the procedure and ensures the stabilization of active ingredients in the hair structure.

TIP FOR BLONDES

If needed, after the procedure, a non-ammonia toning mask can be used to maintain a clean and even tone.

Botox Instructions - SUPREME

HOW THE PROCEDURE IS PERFORMED

1. Wash hair 3 times with a deep cleansing shampoo.

For the last wash, it is recommended to use warm water to help open the cuticle.

2. Remove excess moisture with a towel.

3. Divide hair into 4 sections and apply the product to towel-dried or completely dried hair, depending on the hair structure, condition, and the professional assessment of the stylist.

Hair should be free of running water and excess moisture.

4. Waiting time:

• for thick and coarse hair – up to 45 minutes

• for fragile and fine hair – up to 30 minutes

5. After the exposure time, rinse the product out with water and blow-dry hair 100% dry.

6. Divide hair into thin sections and straighten.

STRAIGHTENING STANDARD

SUPREME BTX ULTRA MASK

Straighten each section according to the hair structure and condition.

Number of passes per section

• fine, bleached, or damaged hair – 6–10 times

• medium-structured hair – 10–15 times

Temperature recommendations

• for fine, blonde, colored, or thin hair – 180–210 °C

• for thick or resistant hair – up to 230 °C

For best results, it is recommended to use a titanium straightener.

WASHING AFTER THE PROCEDURE

After the procedure, washing the hair is not mandatory.

If hair is washed within the first 24 hours, observe:

• do not use shampoo

• rinse hair only with water

• conditioner or mask is allowed

Botox Instructions - BLOND MATIZ

HOW THE PROCEDURE IS PERFORMED

1. Wash hair 3 times with cleansing shampoo.

During the last wash, the shampoo can be left on for up to 5 minutes to help open the cuticle.

2. Rinse out the shampoo 100% and dry the hair 100%.

3. Apply BTX Blond Matiz Ultra Mask to dry hair, section by section, using a brush.

Do not apply to the scalp.

4. Waiting time:

• for fine, sensitive, blonde or bleached hair – up to 30 minutes

• for thick or coarse hair – up to 45 minutes

5. After the processing time, rinse the product out completely with water.

6. Blow dry hair 100% dry.

7. Divide hair into thin sections and straighten.

STRAIGHTENING STANDARD

BTX BLOND MATIZ ULTRA MASK

Straighten each section according to the hair structure and condition.

Number of passes per section

• fine, bleached or sensitive hair – 6–10 times

• medium-structured hair – 10–15 times

Temperature recommendations

• for fine, blonde, gray or colored hair – 180–210 °C

• up to 230 °C only in exceptional cases on more resistant, unbleached sections

For best results, it is recommended to use a titanium straightener.

WASHING AFTER THE PROCEDURE

Washing hair after the procedure is not mandatory.

If hair is washed within the first 24 hours, follow these rules:

• do not use shampoo

• rinse hair with water only

• conditioner or mask is allowed

Restorative Procedure - GELATINA

HOW THE PROCEDURE IS PERFORMED

Cold restoration

1. Wash hair with Let Me Be shampoo.

2. Towel dry hair and divide into 4 sections.

3. Put the product in your palm and rub until a creamy consistency forms.

4. Apply the product section by section along the length of the hair.

5. Leave on for 20–40 minutes.

6. Rinse the product out 100% with water.

7. Finish the procedure as desired.

Especially intensive moisturizing with heat

1. Wash hair twice with Phyto Detox or Let Me Be daily shampoo.

2. Remove excess moisture with a towel.

3. Put the product in your palm and rub until a creamy consistency forms.

4. Apply the product section by section along the length of the hair.

5. Leave on for 40 minutes.

6. Rinse the product out 100% with water.

7. Blow dry the hair.

8. To enhance shine and collagen effect, finish with a straightener:

• straighten each section about 5 times

• temperature 180–220 °C

It is recommended to combine with Phyto Power heat protection and Velvet Drops oil for best results — for long-lasting shine, smoothness, and heat protection.

Nanoplastics - PROTEIN SMOOTHING

HOW THE PROCEDURE IS PERFORMED

1. Shake the product thoroughly before use.

2. Pre-washing is not mandatory. If hair contains oils, masks, or styling products, wash with a daily shampoo. Shampoo must be completely rinsed out, and hair must be 100% dried before applying the product.

3. The product is applied to dry hair, avoiding the scalp.

4. Processing time

• for blonde, colored, gray, bleached or fine hair – up to 50 minutes

• for thick, resistant or naturally curly hair – up to 1 hour 30 minutes

5. After the processing time, the product is completely rinsed out with water.

6. Hair is 100% dried and treated with heat protection.

7. Hair is divided into thin strands and straightened according to the hair structure and condition.

STRAIGHTENING STANDARD FOR NANOPLASTICS

PROTEIN SMOOTHING

Straighten each strand according to the hair structure and condition

Number of strand passes

• bleached, very fine or damaged hair – 6–10 times

• medium structure, natural or colored hair – 10–15 times

the more sensitive the hair – closer to 10, the denser and more resistant – closer to 15

• thick, curly or very resistant hair – 15–20 times

Temperature recommendations

• for thick or very resistant hair – up to 230 °C

• for fine, light, gray or colored hair – 180–210 °C

For best results, it is recommended to use a titanium straightener.

WASHING AFTER THE PROCEDURE

After the procedure, washing the hair is not mandatory.

If, however, the hair is washed within the first 24 hours after straightening, observe the following:

• do not use shampoo

• rinse hair only with water

• conditioner or mask is allowed

• avoid hot water and intense mechanical action

This approach helps to preserve the result of the procedure, ensures proper stabilization of active ingredients in the hair structure, and reduces premature weakening of the effect.

TIPS FOR BLONDE HAIR

• After the procedure, it is possible to use a toning mask without ammonia

•At the end of the procedure, it is recommended to use Let Me Be Velvet Drops hair oil.

SOS RECONSTRUCTION

USAGE

Standard SOS care (for daily use / salon)

1. Wash hair with Let Me Be shampoo

(Bio Restore or another daily shampoo is recommended).

2. Apply SOS mask to damp hair, massaging strand by strand.

3. Leave on for 3–10 minutes (depending on hair condition).

4. Rinse thoroughly with water.

5. Finish the procedure as desired.

FREQUENCY OF USE

• Recommended to use 1–3 times a week

• Not necessary for daily use to avoid overloading the hair

RECOMMENDATIONS FOR BEST RESULTS

• After using the mask, it is recommended to use Phyto Power heat protection if blow-drying or straightening is planned

• At the end of the procedure, apply Velvet Drops oil (1–2 drops on the ends) to dry hair to enhance shine and softness

FREQUENTLY ASKED QUESTIONS

Does the mask make hair heavy?

No, its texture is light and does not leave residue.

Is it suitable for oily hair?

Yes, when applied only to the lengths and ends.

Is it suitable for chemically treated hair?

Yes, especially recommended after coloring, bleaching, and straightening procedures.

Is a thermal cap or heat necessary?

No, the mask works effectively even without heat.

For an additional effect, you can use an Infrared Ultrasonic Straightener to activate the mask deeper and enhance shine and smoothness.

Infrared Ultrasonic Straightener page:

https://www.letmebe.lv/veikals/item/aksesuari/infrasarkanais-ultraskanas-taisnotajs/

Nanoplastics - BLOND EXPERT SMOOTHING

HOW THE PROCEDURE IS PERFORMED

1. Shake the bottle thoroughly before use.

2. Pre-washing is not mandatory.

If hair has oils, masks, or styling products, wash with daily shampoo.

3. Completely dry the hair.

4. Apply the product to dry hair with a brush, avoiding the scalp.

5. Waiting time

• for blonde, gray, bleached, colored, or fine hair – up to 50 minutes

• for thicker or more resistant hair – up to 1 hour 30 minutes

6. Rinse the product completely with water, removing 100%.

7. Blow dry the hair 100%.

8. Straighten in thin sections.

9. Rinse the hair and use Protein Mask to restore pH and moisturize.

STRAIGHTENING STANDARD

PROTEIN SMOOTHING BLOND EXPERT

Straighten each section according to the hair structure and condition.

Number of passes per section

• very fine, porous, or damaged hair – 6–10 times

• bleached or colored, medium-structured hair – 10–12 times

• denser or more resistant hair – 12–15 times

Temperature recommendations

• for fine, light, gray, or colored hair – up to 180 °C

• for thicker or more resistant hair – up to 210 °C

For best results, it is recommended to use a titanium straightener.

WASHING AFTER THE PROCEDURE

Washing hair after the procedure is not mandatory.

If, however, hair is washed within the first 24 hours after straightening, observe the following:

• do not use shampoo

• rinse hair only with water

• conditioner or mask is allowed

• avoid hot water and intensive mechanical action

This approach helps maintain the results of the procedure, ensures proper stabilization of active ingredients in the hair structure, and reduces premature weakening of the effect.

TIPS FOR BLONDE HAIR

• After the procedure, it is possible to use a toning mask without ammonia

•At the end of the procedure, it is recommended to use Let Me Be Velvet Drops hair oil.

Cauter_One_matu_atjaunosanas_procedurai__500ml-c7489b80be0465da287338e6f5557369.jpg

COUTER FOR HAIR RESTORATION AND STRENGTHENING

USAGE

HOW THE PROCEDURE IS PERFORMED (STANDARD CAUTERIZATION)

1. Wash hair with regular or daily shampoo.

2. Remove excess moisture with a towel.

3. Apply Cauter One to damp hair, distributing the product evenly section by section, gently massaging.

4. Leave on for 10–20 minutes.

5. Rinse with water, removing only excess product.

6. Blow dry hair until it is 100% dry.

7. For best results, finish the procedure with a blow dryer and round brush.

INTENSIVE CAUTERIZATION (ENHANCED RESTORATION)

Especially suitable for very damaged, porous, and dry hair.

1. Wash hair twice with shampoo.

2. Remove excess moisture with a towel.

3. Apply Cauter One section by section.

4. Leave on for 10–20 minutes.

5. Rinse with water, removing only excess product.

6. Blow dry hair 100% dry.

7. Finish the procedure with a straightener, straightening each section about 5 times to enhance the restorative effect.

RECOMMENDATIONS FOR BEST RESULTS

It is recommended to combine with Phyto Power heat protection and Velvet Drops oil for best results — for long-lasting shine, smoothness, and heat protection.

For additional effect, you can use an Infrared ultrasonic straightener to further activate the mask's effect and enhance shine and smoothness.

Infrared ultrasonic straightener page:

https://www.letmebe.lv/veikals/item/aksesuari/infrasarkanais-ultraskanas-taisnotajs/

Nanoplastics - PHYTO COMPLEX Dr. FIBER

HOW THE PROCEDURE IS PERFORMED

1. Shake the bottle thoroughly before use.

2. Wash hair with Let Me Be Phyto shampoo, repeating the wash 2–3 times.

3. Rinse out the shampoo thoroughly.

4. Blow-dry hair with medium heat, smoothing with hands.

Preparing hair before application

• thick natural hair – 100% dry

• fine, curly hair – 100% dry

• bleached or damaged hair – about 50% dry

5. Apply the product with a brush and gloves from roots to ends, avoiding the scalp.

6. Waiting time

• thick natural hair – 60–90 minutes

• fine or curly hair – 50–60 minutes

• bleached, colored or sensitive hair – up to 40 minutes

7. Rinse the product out completely with water only.

8. Blow-dry hair 100% with a hairdryer, a light brushing may be done.

9. Straighten the hair.

STRAIGHTENING STANDARD PHYTO COMPLEX Dr. FIBER

Straighten each strand according to the hair structure and condition.

Number of passes per strand

• very fine, porous or damaged hair – 6–10 times

• bleached or colored, medium-structured hair – 10–12 times

• denser, more resistant hair or with a slight wave – 12–15 times

Temperature recommendations

• for thick or resistant hair – up to 230 °C

• for fine, light, gray or colored hair – 180–210 °C

For best results, it is recommended to use a titanium straightener.

WASHING AFTER THE PROCEDURE

Washing hair after the procedure is not mandatory.

If, however, the hair is washed within the first 24 hours after straightening, observe the following:

• do not use shampoo

• rinse hair only with water

• conditioner or mask is allowed

• avoid hot water and intensive mechanical action

This approach helps to preserve the results of the procedure, ensures proper stabilization of active ingredients in the hair structure, and reduces premature weakening of the effect.

TIPS FOR BLONDE HAIR

• After the procedure, it is possible to use a toning mask without ammonia

•At the end of the procedure, it is recommended to use Let Me Be Velvet Drops hair oil.